Tie On Horns Guidelines

We have selected a model with long hair, just to show how easy it is to use these horns. If you are bald then the clear cord will show, you could select from our range of stick on horns!

These instructions were prepared for Harriet of Muswell Hill who contacted us to ask if they were as simple as they sounded. Take a look and we think you will agree it could not be easier!

1 There are holes drilled at the base of each horn, put the horns in front of you positioned as you will want them on your head. Loop the supplied clear elastic cord through as shown, do not pull the loops too tight you may want to adjust them when they are on your head.

2 Place the horns in position on your head, adjust the spacing if required and tighten the loops. Holding the horns in place with one hand pull the cord down at the back (it needs to be at the nape of your neck). Making sure that the cord has been pulled tight pinch the cord at this point, this is where you will need to tie a knot.

3 Holding tightly at the mark slip the horns off your head and tie at the cords together at the mark. Tie a knot (just like the one you would make at the end of a piece of thread when sewing), do not tie the cord in a bow as it will slip.

4 Slip the horns and cord all the way over your head, let them dangle like a necklace. Then slide then up in to place, this will make sure you do not make a mess of your hair or wig. Once the horns are in place pull hair from under cord to cover it.

5 FINISHED!

Please Note
The above information is a guide only.
If in doubt always follow the specific instructions given on the individual packages. Fancydress.com is not responsible for inappropriate use of its products.